MPF config file reference: FAST Pinball smart power filter board¶
MPF 0.57 Configuration Reference for FAST Pinball Hardware
This page is parrt of the reference material for users of the Mission Pinball Framework and FAST Pinball hardware. If you're new to MPF and FAST, read the MPF + FAST overview first. If you are a programmer writing your own software, see our Developer's Reference Guide.
Note that this guide only applies to MPF 0.57. If you're using MPF 0.56 or older, then the FAST Pinball configuration section of the Mission Pinball website has everything you need.
The FAST Smart Power Filter board has a breakout header which lets you connect it to your FAST controller. Then MPF can monitor current, remotely disable the high voltage, and view the status of the board's fuses.
This functionality has not been released yet, but will be added to MPF when it is.
This section of the documentation is not yet complete and will be coming soon. However, if you need this now, and/or you want to share what documentation is most important to you, please post to the #docs channel in the FAST Pinball Slack community. Thanks!
Documentation Feedback? Requests? Confused?
Hi! I'm Brian, and I'm responsible for the documentation at FAST Pinball. If you have any feedback, requests, corrections, ideas, or any other thoughts about the docs, please let me know!
You can email me at firstname.lastname@example.org. I maintain this site in my spare time, so there might be a week or so delay if you email me.
If you have a more pressing need, reach out to us via Slack, or email Aaron Davis.
N or > jump the next page, P or < for previous, search with S or ?