Controlling RGB LEDs on a Nano Controller via the FAST Serial Protocol¶
FAST Serial Protocol: Overview & First Steps
This documentation section is about the FAST Serial Protocol (FSP) commands, which are the low-level commands a host computer sends to a FAST board. Most FAST Pinball makers do not need to know about these details, since the pinball game framework (such as the Mission Pinball Framework) handles this communication for you.
If you're writing your own game framework, we have a series of programming guides. Also, be sure to read the overview of how FSP works and how to connect first.
The legacy RGB commands are used with LEDs attached to the ports on a FAST Nano Controller. (Note that LEDs attached to the Neuron or other expansion boards are controlled via the EXP Bus connection and use EXP commands, not these RGB commands.)
There are commands to set the color of individual LEDs or all LEDs.
N or > jump the next page, P or < for previous, search with S or ?