ID: Processor / board identification¶
FAST Serial Protocol: Overview & First Steps
This documentation section is about the FAST Serial Protocol (FSP) commands, which are the low-level commands a host computer sends to a FAST board. Most FAST Pinball makers do not need to know about these details, since the pinball game framework (such as the Mission Pinball Framework) handles this communication for you.
If you're writing your own game framework, read the overview of how FSP works and how to connect first.
ID: command is used to get the processor and board identification for the FAST controller that's connected. It will also show the firmware version. This command is also a good choice for just checking if the system is up and running. Running this command does not modify anything on the FAST platform.
ID:<Processor> <Product Number> <Firmware version>
ID:<CR> ID:NET FP-SBI-0095 01.99
This example is showing a connection to the NET processor, to product number FP-SBI-0095, running firmward version 1.99.
Documentation Feedback? Requests? Confused?
Hi! I'm Brian, and I'm responsible for the documentation at FAST Pinball. If you have any feedback, requests, corrections, ideas, or any other thoughts about this documentation, please let me know! You can email me at email@example.com. Thanks!
N or > jump the next page, P or < for previous, search with S or ?