Skip to content

FAST Cabinet I/O Board 2408

Part Number: FP-CAB-0001-1

The FAST Cabinet I/O Board is a special purpose I/O board designed for placement in the pinball cabinet itself. This board handles all cabinet buttons & switches, including flippers, start button, launch, tilt(s), coin switches, service buttons, bill validators, etc. It also includes 8 drivers--a standard high current one for a knocker, and 7 low current drivers to control LEDs for lighted buttons.

Since this Cabinet I/O Board is part of the "Gen 2" modern platform (for machines built with the FAST Neuron Controller), switch and driver pairs can be on different boards, so you can have your flipper buttons connected to this Cabinet I/O Board while the flipper coils and EOS switches are connected to a different I/O Board under the playfield.

The FAST Cabinet I/O Board has three switch headers (for the cabinet's left side switches & buttons, the right side ones, and coin door interfaces).

Note that this I/O Board only works with FAST Neuron Controllers. It is not compatible with the "Gen 1" controllers such as the Nano.

Note

The FAST Modern Platform has various I/O Boards with different combinations of switch inputs and driver outputs. See the FAST Modern Platform documentation for details.

Features

  • 24 direct switch inputs
  • 8 driver outputs

Connectors

Coming soon ...

Mechanical Diagram

Coming soon ...

Block Diagram

Coming soon ...

Status LEDs

Coming soon ...

MOSFET / driver mapping

Coming soon ...

Firmware Updates

FAST I/O Boards have firmware. Check our firmware page to see the latest versions and learn how to update your boards if needed.

Wiring Guides

Coming soon ...

Connector Pinouts

Coming soon ...

Documentation Feedback? Requests? Confused?

Hi! I'm Brian, and I'm responsible for the documentation at FAST Pinball. If you have any feedback, requests, corrections, ideas, or any other thoughts about this documentation, please let me know! You can email me at brian@fastpinball.com. Thanks!

N or > jump the next page, P or < for previous, search with S or ?