The FAST Power Filter Board provides an elegant way to integrate switching power supplies into a pinball machine. To help protect users, a hardware switch can be wired to a coin-door to kill the high voltage at the power filter board while still allowing the 5v and 12v into the system. A switch output from the power filter board can connected to any switch input in the FAST system and be used to trigger an on-screen “High Voltage Disabled while Coin Door Open” message.
Feature Highlights
Connector Pinout
J1 | PIN | ENABLE IN (HV+ & V1 Enabled when Shorted) | 3-Pin .100? |
SW | Coin Door Switch Input | INPUT | |
\/ | KEY | N/A | |
GND | Coin Door Switch Return | INPUT |
J2 | PIN | ENABLE OUT (Switch Input Triggered on Coin Door Open) | 3-Pin .100? |
+ | Enable Out + | OUTPUT | |
– | Switch Return Ground | OUTPUT | |
\/ | KEY | N/A |
J3 | PIN | POWER INPUT | 12-Pin .156? |
HV+ | High Voltage (48v) | INPUT | |
HV+ | High Voltage (48v) | INPUT | |
GND | High Voltage Ground from Power Supply | INPUT | |
GND | High Voltage Ground from Power Supply | INPUT | |
5v | 5 Volts | INPUT | |
5v | 5 Volts | INPUT | |
12v | 12 Volts | INPUT | |
\/ | KEY | N/A | |
GND | Ground from Power Supply | INPUT | |
GND | Ground from Power Supply | INPUT | |
V1 | Auxilary Voltage 1 | INPUT | |
V2 | Auxilary Voltage 2 | INPUT |
J4 | PIN | POWER OUTPUT | 12-Pin .156? |
HV+ | Fused High Voltage (48v) | OUTPUT | |
HV+ | Fused High Voltage (48v) | OUTPUT | |
GND | Power Return Ground | OUTPUT | |
GND | Power Return Ground | OUTPUT | |
5v | Fused 5 Volts | OUTPUT | |
5v | Fused 5 Volts | OUTPUT | |
\/ | KEY | N/A | |
12v | Fused 12 Volts | OUTPUT | |
GND | Power Return Ground | OUTPUT | |
GND | Power Return Ground | OUTPUT | |
V1 | Fused Auxilary Voltage 1 | OUTPUT | |
V2 | Fused Auxilary Voltage 2 | OUTPUT |