Skip to content

RA: Set all LEDs command: EXP Bus Command Reference

Understanding EXP board addressing

This command is used with FAST Expansion and FAST Breakout Boards via a FAST Serial Protocol (FSP) connection to the EXP Bus. Please read the EXP Overview to understand the operation of these commands and addresses.

Coming soon!

This section of the documentation is not yet complete and will be coming soon. However, if you need this now, and/or you want to share what documentation is most important to you, please email Brian. Thanks!

This command sets all the LEDs connected to all ports on a breakout board to be the same color.

RA:<RGB Color><cr>

Example:

Turn on all LEDs connected to the 201 Expansion Board, at ID 0 (address 88), about 20% green

ea:880
ra:005500

Documentation Feedback? Requests? Confused?

Hi! I'm Brian, and I'm responsible for the documentation at FAST Pinball. If you have any feedback, requests, corrections, ideas, or any other thoughts about this documentation, please let me know! You can email me at brian@fastpinball.com. Thanks!

N or > jump the next page, P or < for previous, search with S or ?